Click here to Buy Now


Techne® invented the "Clip On" thermoregulator in 1948 and now offer four units. Thermoregulators are designed to be used with the Techne® unheated water baths or any other suitable laboratory vessels. They will heat, circulate and safely control the temperature of the liquid in the bath within precise limits.

• Temperature range of -20°C to 95°C
• Please note for sub-ambient cooling a Dip Cooler or Flow Cooler is required. Click here.
• Applications <0°C and >100°C require Techne bath oil. Click here.

• Excellent temperature stability: ±0.01°C at 40°C
• Simple to use analogue control
• Suitable for most routine laboratory applications
• User adjustable over-temperature cut-out for unbeatable safety

Sub-ambient cooling
This thermoregulator can be used for sub-ambient cooling, right down to -20°C, although a low-temperature liquid is required below 0°C. Sub-ambient cooling can be achieved using the cooling coil accessory (part number FCC01) connected to an external chilling system, for example a cold tap. Alternatively a Techne dip-cooler or flow cooler could be used as a method of chilling.

External circulation
This thermoregulator can be used in several ways. (1) Stand-alone waterbath temperature controller with precision accuracy and stirring action. (2) Pump for recirculating chilled liquid produced in an external chiller allowing sub-ambient water bath temperature. (3) Pump for providing temperature control to an external system or device. (4) A combination of using externally chilled liquid and providing temperature control to an external system. For additional information, please see Application notes under "Downloads".

Technical Specification

Specifications to DIN 12876 TE-10A
Temperature range* -20°C to +95°C
Temperature selec tion Analogue
Temperature stability using water @ 40°C ±0.01°C
Method of control Proportional
Temperature sensor Thermistor
Adjustable over-temperature cut-out Yes
Low liquid level cut-out No
Pump capacity (L per min) 10
Pump capacity (mbar) 145
Power (W) 1000
Extension below base (mm) 145
Dimensions L x W x H (mm) 237 x 124 x 260
Shipping weight 3.7kg

Ordering Information

Product Code Description
FTE10ADC TE-10A analogue thermoregulator, supplied with clamp (230V)
FTE10APC TE-10A analogue thermoregulator, supplied with clamp (120V)

Return to Category